·中文版·ENGLISH

ZHANHAO sports floor glur is the only
assigned floor of World Chinese Badminton Invitation Event

The sponsor of 2010 Guangzhou Asian Games!

You are here:Home > Assemblage

Assemblage

Assemblage methods of PVC Plastic Sports Flooring

Movable assemblage

The pieces of flooring are cemented together with the special linking belts by the manufacturer,but the flooring in a whole would not adhere to the ground to facilitate moving.

Stationary assemblage

1、Partial cementation:Starting from the borderline of the flooring,paint glue for cementation inward for 10cm;

2、Full-giue cementation:Cover the whole ground under the flooring with glue for cementation.

Welding

1、After connected with the spcial strip,use the U chamfer machine to dig the product′s the 1/2-1/3thickness;

2、Power on to warm-up the welding gun and insert the welding strip to start the welding;

3、Finish the welding.

Detailen lnstruction

1、The ground for laying floor should be leveled and cleaned;

2、The pieces should be arranged in fixed order and aligned;make sure that the flooring be aligned with the court line;

3、Lift up two neighboring pieces from the commissure, place the special linking belt provided by the manufacturer under the commissure,and paint some glue on the linking belt.Then,make one of two pieces glued to half of the linking belt,and the other to the rest part.Do tighten the two pieces to minimize the gap at joint.

Tips For Use

1、Neuer step on the court with leather shoes,high-heeled shoes,or sports shoes than easily decolor;

2、Neuer cut,squeeze,or press it,The surface should not be abraded by hard articles to avoid breaking or damage;

3、Neuer use corrosive chemicala like acid and alkali on the flooring and keep it off fire and high temperature to avoiddeformation.

Copyright © Guangzhou Zhanhao Sporting Goods Co.,Ltd. 粤ICP备09029215号-1
TEL:+86-20-62670099-29-99 Follow Us:
Address:No. 582 North Of Baiyundadao Road Guang Zhou China.
展灏二维码